Demonstration Handouts

There are 48 files, weighing 1.1 GiB with 23,942 hits in Instruction.

Displaying 1 to 48 of 48 files.

Instruction

  Turning a Nativity Set
» 482.0 MiB – 4 hits – 11/25/2025
Mark Trenier’s Instructions for turning a Nativity Set – November 2025 Meeting Demonstration

  Sally Ault Dirty Pour Lids Handout
» 65.9 KiB – 51 hits – 08/09/2025
Sally Ault Dirty Pour Lids Handout

  Sally Ault Lidded Bowl Handout
» 140.5 KiB – 40 hits – 08/09/2025
Sally Ault Lidded Bowl Handout

  Tree Falling And Safety
» 187.7 KiB – 70 hits – 04/06/2025
Mike Wendt’s notes on safe tree falling and chainsaw use

  Mark Trenier March 2025 Presentation
» 510.3 MiB – 64 hits – 03/14/2025
Shop Organization

  Pendant Jig Instructions
» 3.6 MiB – 75 hits – 02/09/2025
Instructions for sliding offset jig for turning pendants and other items on a wood lathe.

  Weeble Bowls
» 294.1 KiB – 75 hits – 02/08/2025
Handout prepared for Leigh White’s presentation of Weeble Bowls for February 2025 Meeting

  2024 Trenier Birdhouse Ornament Document
» 117.7 KiB – 122 hits – 11/18/2024
Handout for Mark Treniers 2024 Birdhouse and Ornament Demonstration – October 2024

  Donna Zils Banfield Demo Handout
» 856.0 KiB – 220 hits – 02/20/2024
Wood Ffolkkes: A Sculptural Community IRD for Milwaukee Woodturners Saturday, February 24, 2024

  Sliced Hollow From – Tools List
» 74.5 KiB – 294 hits – 09/18/2023
List of resources required to create a sliced hollow form connected with decorative inlays as demonstrated by David Landers at the September 2023 Meeting

  Photo Program – Is Good Enough Good Enough
» 31.5 MiB – 363 hits – 06/10/2023
Slide presentation of Dennis Claytons presentation at the June 2023 Meeting

  Natural Edge Bowls
» 10.5 MiB – 207 hits – 11/17/2022
Powerpoint Slides of NE Bowl Presentation converted to PDF. Mostly Pictures. By Tony Rozendaal – presented at October 2022 Meeting.

  Making_Winsor_Chairs_Demo_Curt_VW_5-2-22.pdf
» 2.0 MiB – 311 hits – 05/06/2022
Power Point Presentation Used for Curt Van Weelden’s May 2022 Demo on making Windsor Charis

  Sketchup File of Therming Jig
» 490.2 KiB – 2 hits – 03/09/2022
You do not have permission to download this file.
A Sketchup file of the terming jig. The circumference of the jig is 15-1/2 inches. 3D file. Can be rotated for a number of difference views. Drawn by Tony Rozendaal

  Therming, by Ron Bukowy
» 3.2 MiB – 2 hits – 03/09/2022
You do not have permission to download this file.
PDF of Powerpoint presentation made to MAWT by Ron Bukowy on March 7, 2022. Must be signed in to download this file.

  Finial Tool List
» 65.6 KiB – 300 hits – 02/08/2022
Cindy Drozda’s List of Tools used for Finial Creation

  Finial Proportions
» 582.5 KiB – 243 hits – 02/08/2022
Cindy Drozda’s Finial Dimensions

  Finial Guidelines
» 51.2 KiB – 242 hits – 02/08/2022
Cindy Drozda’s Finial Guidelines

  Ring Master Bowl Handout
» 8.2 MiB – 284 hits – 01/02/2022
Tom Hipsak’s Handout for January 2022 Meeting

  3kg_Persian_Meel_US_Template.pdf
» 211.8 KiB – 664 hits – 11/09/2021

  Marbling Basics by Carl Brust
» 544.9 KiB – 307 hits – 10/28/2021
Different methods of applying marbling enhancements to completed wood turnings.

  Harvey Meyer – Turning the Pedestal Box
» 440.6 KiB – 443 hits – 09/16/2021
Instructions for Turning the Box as Demonstrated September 13, 2021

  Rebecca DeGroot’s Walking Bowl Instructions
» 145.3 KiB – 416 hits – 03/05/2021

  Hand Mirror Demo Handout
» 21.7 MiB – 423 hits – 10/22/2020
Handout for Hand Mirror Demo by Mark Trenier – October 2020

  AcornBoxes.pdf
» 44.8 MiB – 707 hits – 06/03/2020
Step by Step Instructions for making acorn boxes as demonstrated for the June 2020 meeting.

  Wooden_Hats.pdf
» 10.1 MiB – 497 hits – 02/13/2020

  Buffing Handout
» 285.8 KiB – 886 hits – 06/01/2019
Mostly deals with resources for buffing supplies. A little bit about technique.

  Finishing for Woodturners
» 48.4 KiB – 668 hits – 11/06/2018
A review of the different types of finishes that are available on the market and how they can be used for woodturning.

  Birdhouse Ornaments
» 535.4 KiB – 651 hits – 05/12/2018
Handout prepared by Mark Trenier for his demo at the May 2018 meeting.

  Protect Wood From Chuck Jaws
» 177.0 KiB – 624 hits – 05/07/2018
Tip on Protecting Wood from Chuck Jaws, by Bill Fordney, from the Woodturning Chatter section of the October 2012 issue of American Woodturner.

  Woodworm Screws by Mike Peace
» 361.3 KiB – 1,457 hits – 03/02/2018
An overview of the use of woodworm screws for holding a turning blank.

  Cut Bowl Bottoms With Confidence
» 215.9 KiB – 753 hits – 02/02/2018
All of us have blown through the bottom of a bowl or left a chunky bottom. This article shows three gauges to help determine the thickness of the bowl bottom.

  Jam Chucking Tips
» 266.8 KiB – 775 hits – 10/16/2017
“The Jam Chuck,” by Peter M. Smith, and “Better Success with Jam-Chucking,” by Chris Wright, from the August 2017 issue of Woodturning FUNdamentals.

  Jam Chucking Tips
» 266.8 KiB – 905 hits – 10/16/2017
“The Jam Chuck,” by Peter M. Smith, and “Better Success with Jam-Chucking,” by Chris Wright, from the August 2017 issue of Woodturning FUNdamentals.

  Drying Equipment List
» 252.2 KiB – 824 hits – 09/15/2017
PDF Format. Includes link to the humidity/temperature controller.

  Curt Van Weelden demo
» 664.9 KiB – 874 hits – 09/12/2017
PDF Document of the presentation on Drying Wood given by Curt Van Weelden at the September 2017 Meeting.

  Harvesting Wood Presentation Notes
» 290.9 KiB – 863 hits – 09/12/2017
PDF Format

  Wood Drying Log (PDF)
» 316.6 KiB – 929 hits – 09/12/2017
For those who do not have Microsoft Access, a PDF version of the Wood Drying Log. Includes the Equipment list.

  Wood Drying Log (Excel)
» 20.3 KiB – 775 hits – 09/12/2017
Excel Wood drying log with built in graphing. Includes Equipment List.

  Generic Lathe Maintenance Guidelines
» 370.4 KiB – 1,025 hits – 05/05/2017
Handout created by Brent English for the May 2017 meeting.

  Demo Ideas Survey
» 414.7 KiB – 488 hits – 02/01/2017

  Thinking Outside the Box
» 1.3 MiB – 857 hits – 02/02/2014
by Ron Zdroik

  Rolling Pin Instructions
» 187.1 KiB – 862 hits – 01/01/2014
Rolling Pin Instruction

  Cryptex
» 325.6 KiB – 654 hits – 08/01/2013
Cryptex Instructions

  String Steady Drawings and Instruction
» 1.1 MiB – 819 hits – 05/01/2013
by Rob Nelson – May 2013

  Vacuum Pump Instructions
» 6.4 MiB – 611 hits – 04/01/2013
Instructions for Vacuum Pump and Chucks by Bob Nelson (Frugal Vacuum Chucks)

  Vacuum Pump Pictures
» 697.8 KiB – 608 hits – 04/01/2013
Pictures taken at the demo by Bob Nelson (Frugal Vacuum Chuck) at the Demo

  Photography
» 40.1 KiB – 608 hits – 01/01/2013
Photography Purchase List and Suppliers by Ron Nelsen